ConnectX-3 EN MCX311A-XCAT 10GbE
— Taguma (@taguma2) May 22, 2018
Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3]
driver: mlx4_en
version: 4.0-0
firmware-version: 2.42.5000
ConnectX-3 EN MCX311A-XCAT 10GbE
— Taguma (@taguma2) May 22, 2018
tcp_bw:
bw = 1.14 GB/sec
msg_rate = 17.4 K/sec
send_cost = 210 ms/GB
recv_cost = 193 ms/GB
send_cpus_used = 24 % cpus
recv_cpus_used = 22 % cpus
ConnectX-3 EN MCX311A-XCAT 10GbE
— Taguma (@taguma2) May 22, 2018
tcp_lat:
latency = 16.5 us
msg_rate = 60.6 K/sec
loc_cpus_used = 16 % cpus
rem_cpus_used = 2.5 % cpus
ConnectX-3 EN MCX311A-XCAT 10GbE
— Taguma (@taguma2) 2020年6月11日
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 10.9 GBytes 9.40 Gbits/sec 0 sender
CPU Utilization: local/sender 33.5% (1.3%u/32.1%s)
ConnectX-3 EN MCX311A-XCAT 10GbE
— Taguma (@taguma2) 2020年6月11日
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 10.9 GBytes 9.40 Gbits/sec receiver
CPU Utilization: remote/receiver 36.6% (2.7%u/33.9%s)
