HP HPSA Driver (v 3.4.20-170)
hpsa 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
hpsa 0000:01:00.0: HP SSD Smart Path aborts not supported
scsi host6: hpsa
hpsa can't handle SMP requests
hpsa 0000:01:00.0: scsi 6:0:0:0: added RAID HP p1228 controller SSDSmartPathCap- En- Exp=1
hpsa 0000:01:00.0: scsi 6:0:1:0: added Direct-Access SanDisk LT0400MO PHYS DRV SSDSmartPathCap- En- Exp=1
hpsa can't handle SMP requests
scsi 6:0:0:0: RAID HP p1228 0234 PQ: 0 ANSI: 5
hpsa can't handle SMP requests
scsi 6:0:1:0: Direct-Access SanDisk LT0400MO C404 PQ: 0 ANSI: 6
scsi 6:0:0:0: Attached scsi generic sg2 type 12
sd 6:0:1:0: Attached scsi generic sg3 type 0
sd 6:0:1:0: [sdb] 781422768 512-byte logical blocks: (400 GB/373 GiB)
sd 6:0:1:0: [sdb] Write Protect is off
sd 6:0:1:0: [sdb] Mode Sense: cf 00 10 08
sd 6:0:1:0: [sdb] Write cache: enabled, read cache: disabled, supports DPO and FUA
sd 6:0:1:0: [sdb] Optimal transfer size 131072 bytes
sd 6:0:1:0: [sdb] Attached SCSI disk
# lsscsi
[6:0:0:0] storage HP p1228 0234 -
[6:0:1:0] disk SanDisk LT0400MO C404 /dev/sdb
# hpsahba -i /dev/sg2
VENDOR_ID='HP'
PRODUCT_ID='p1228'
BOARD_ID='0x007d1590'
SOFTWARE_NAME=''
HARDWARE_NAME=''
RUNNING_FIRM_REV='0234'
ROM_FIRM_REV='0234'
REC_ROM_INACTIVE_REV='0234'
YET_MORE_CONTROLLER_FLAGS='0xb25e7614'
NVRAM_FLAGS='0x08'
HBA_MODE_SUPPORTED=1
HBA_MODE_ENABLED=1
