OEM QTAPCABLE28-3M
Identifier : 0x11 (QSFP28)
Extended identifier : 0x10
Extended identifier description : 1.5W max. Power consumption
Extended identifier description : No CDR in TX, No CDR in RX
Extended identifier description : High Power Class (> 3.5 W) not enabled
Connector : 0x23 (No separable connector)
Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Transceiver type : 40G Ethernet: 40G Base-CR4
Transceiver type : 100G Ethernet: 100G Base-CR4 or 25G Base-CR CA-L
Encoding : 0x05 (64B/66B)
BR, Nominal : 25500Mbps
Rate identifier : 0x00
Length (SMF,km) : 0km
Length (OM3 50um) : 0m
Length (OM2 50um) : 0m
Length (OM1 62.5um) : 0m
Length (Copper or Active cable) : 3m
Transmitter technology : 0xa0 (Copper cable unequalized)
Attenuation at 2.5GHz : 0db
Attenuation at 5.0GHz : 0db
Attenuation at 7.0GHz : 13db
Attenuation at 12.9GHz : 18db
Vendor name : OEM
Vendor OUI : 00:00:00
Vendor PN : QTAPCABLE28-3M
Vendor rev : _
Date code : 180119
Revision Compliance : SFF-8636 Rev 2.5/2.6/2.7
Module temperature : 33.35 degrees C / 92.03 degrees F
Module voltage : 3.2854 V
Alarm/warning flags implemented : No
Laser tx bias current (Channel 1) : 0.000 mA
Laser tx bias current (Channel 2) : 0.000 mA
Laser tx bias current (Channel 3) : 0.000 mA
Laser tx bias current (Channel 4) : 0.000 mA
Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm
Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm
Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm
Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm
Receiver signal OMA(Channel 1) : 0.0000 mW / -inf dBm
Receiver signal OMA(Channel 2) : 0.0000 mW / -inf dBm
Receiver signal OMA(Channel 3) : 0.0000 mW / -inf dBm
Receiver signal OMA(Channel 4) : 0.0000 mW / -inf dBm
